Graco 238515 Shut-Off Default Amount, This menu, you can change the shut-off default amount

Setup

Shut-Off Default Amount

The shut-off default amount is for preventing acciden- tal overfills when dispensing with the trigger locked in Manual mode. The shut-off default amount is factory preset at 5 quarts.

In this menu, you can change the shut-off default amount.

1.If you have not already entered the dispensing options menus, do steps 1 and 2 in Selecting Dispensing Options on page 8.

2.Press the Auto/Reset button repeatedly until the clock icon blinks, and the stored shut-off default amount is displayed to indicate that you are in the Shut-off Default Amount menu.

3.With the clock icon blinking and the stored shut-off default amount displayed, as shown below, do ONE of the following two options:

D Enter a new shut-off default amount by press- ing the 10 button to change the 10s digit, the 1.0 button to change the 1s digit, and the 0.1 button the change the first decimal digit. You cannot enter zero. To lock in the new shut-off default amount and exit the dispensing options menus, press the Auto/Re- set button.

The PM5 beeps and returns to the Manual dispense mode to indicate that you have exited the dispensing options menus.

OR

DPress the Auto/Reset button.

The PM5 beeps and returns to the Manual dispense mode to indicate that you have exited the dispensing options menus.

QTS

! CAUTION

To prevent overfills and spills

D Do not obstruct the trigger D Do not operate below 32_ F (0_ C) D Do not leave unattended D Read instruction manual

Maximum Working Pressure 7 MPa (70 bar, 1000 PSI)

06044A

10 309377