Maintenance, Clean Gun Daily | Graco 247937, 247936 manual

Maintenance

Maintenance

Clean Gun Daily

1. Flush, page 18.

2.

a.Clean outside of gun with non-conductive, compatible solvent. Point gun down.

b.Use soft, damp cloth.

c.Do not immerse gun.

ti1295a

ti1292a

ti1293a

ti1294a

3. Remove air cap.

ti1296

4.Clean air cap, retaining ring, and nozzle with soft brush and non-conductive, compatible solvent.

ti1297a

5. Clean probe with soft brush and compatible solvent.

ti12716

6.Use toothpick or other soft tool to clean air cap holes. Do not use metal tools.

7. Reinstall air cap. Tighten securely.

ti1299a

20

312900G

Image 20

Graco 247937, 247936 important safety instructions Maintenance, Clean Gun Daily

Contents

PRO Xs Waterborne Air Spray Gun II 2 G EEx 0.24 mJ Table of Contents FIRE, EXPLOSION, and Electric Shock Hazard Equipment Misuse Hazard Overview How the Electrostatic Air Spray Gun WorksSmart Model 247937 Standard Model 247936 Air swivel inlet. Left-hand thread Fan air adjustment valve. Adjusts fan size ES indicator 247936 only. Green when ES is on Ventilate the Spray Booth InstallationInstall the System Typical Installation Key Grounded Air Supply Hose Connect the Air LineConnect the Charging Probe Filter the Fluid Connect the Exhaust TubeConnect the Fluid Line Select a Fluid Nozzle and Air Cap Orifice Size Grounding Fire, Explosion, and Electric Shock Hazard Check Electrical Grounding Check Fluid Resistivity Check Fluid Viscosity Prepare to Paint Turn ES ON/OFF switch on Flush Pressurized Equipment Hazard Pressure ReliefShutdown Maintenance Clean Gun Daily Daily System Care Electrical Troubleshooting Electric Shock HazardSee Test Total Gun Resistance on See Check Electrical Grounding on Electrical Tests Test Gun ResistanceTest Total Gun Resistance Test Charging Probe Resistance Test Power Supply Resistance Test Barrel Resistance Spray Pattern Troubleshooting Gun Operation Troubleshooting Gun Repair Prepare the Gun for Repair Replace Air Cap/Nozzle Replace Fluid Needle Remove Fluid Packing Remove Fluid Packing Repair Packing Rod Packing Rod Install Barrel Remove Barrel Remove and Replace Power Supply Power Supply Repair Fan Air Adjustment Valve Remove and Replace Turbine Alternator Repair Fluid Adjustment Valve Repair Air Valve Remove and Replace Atomizing Air Restrictor Valve Repair ES ON/OFF Valve Ref. No Multi-tool PartsPart No 60 kV Electrostatic Gun, Series a Standard model Part No 60 kV Electrostatic Gun, Series a Smart model Ref. No Alternator Ref. No Fan Adjustment Valve Ref. No Packing RodRef. No ES ON/OFF Valve Smart Model controls Description Qty Description Qty Fluid Line Accessories AccessoriesAir Line Accessories Gun Accessories Miscellaneous Accessories Technical Data Category Data Graco Warranty Graco Information