Flush | Graco 247937, 247936 specs

Installation

Flush

Fire, Explosion, and Electric Shock Hazard

Read Fire and Explosion, and Electric Shock Hazards, page 3. Follow steps 1-6below to flush the gun when using gun first time, changing colors, before fluid dries, at end of day, and before storing gun.

NOTICE

This gun has nylon components which will be dam- aged if you use methylene chloride as a flushing or cleaning solvent.

1. Turn ES ON/OFF switch OFF (O).

ti12724_x2

2. Relieve pressure, page 19.

ti1934

3.Change fluid source to solvent, or disconnect fluid line and connect solvent supply line to gun.

ti1287a

4.Point gun into grounded metal pail. Flush until clean solvent flows from gun.

ti1934

5. Relieve pressure, page 19.

ti1934

6. Hang gun from hook. Nozzle must point down.

ti12718

18

312900G

Image 18

Graco 247937, 247936 important safety instructions Flush

Contents

PRO Xs Waterborne Air Spray Gun II 2 G EEx 0.24 mJ Table of Contents FIRE, EXPLOSION, and Electric Shock Hazard Equipment Misuse Hazard Smart Model 247937 OverviewHow the Electrostatic Air Spray Gun Works Standard Model 247936 Air swivel inlet. Left-hand thread Fan air adjustment valve. Adjusts fan size ES indicator 247936 only. Green when ES is on Installation Install the SystemVentilate the Spray Booth Typical Installation Key Connect the Air Line Connect the Charging ProbeGrounded Air Supply Hose Connect the Exhaust Tube Connect the Fluid LineFilter the Fluid Select a Fluid Nozzle and Air Cap Orifice Size Grounding Fire, Explosion, and Electric Shock Hazard Check Electrical Grounding Check Fluid Resistivity Check Fluid Viscosity Prepare to Paint Turn ES ON/OFF switch on Flush Pressure Relief ShutdownPressurized Equipment Hazard Maintenance Clean Gun Daily Daily System Care See Test Total Gun Resistance on Electrical TroubleshootingElectric Shock Hazard See Check Electrical Grounding on Test Total Gun Resistance Electrical TestsTest Gun Resistance Test Charging Probe Resistance Test Power Supply Resistance Test Barrel Resistance Spray Pattern Troubleshooting Gun Operation Troubleshooting Gun Repair Prepare the Gun for Repair Replace Air Cap/Nozzle Replace Fluid Needle Remove Fluid Packing Remove Fluid Packing Repair Packing Rod Packing Rod Install Barrel Remove Barrel Remove and Replace Power Supply Power Supply Repair Fan Air Adjustment Valve Remove and Replace Turbine Alternator Repair Fluid Adjustment Valve Repair Air Valve Remove and Replace Atomizing Air Restrictor Valve Repair ES ON/OFF Valve Parts Part No 60 kV Electrostatic Gun, Series a Standard modelRef. No Multi-tool Part No 60 kV Electrostatic Gun, Series a Smart model Ref. No ES ON/OFF Valve Ref. No Alternator Ref. No Fan Adjustment ValveRef. No Packing Rod Smart Model controls Description Qty Description Qty Accessories Air Line AccessoriesFluid Line Accessories Gun Accessories Miscellaneous Accessories Technical Data Category Data Graco Warranty Graco Information