Unpacking and Repacking
Unpacking and Repacking
Unpacking the Product
The PrecisionSwirl orbital dispenser and control assem- bly were carefully packaged for shipment by Graco. When the package arrives, perform the following proce- dure to unpack the units:
1.Inspect the shipping box carefully for shipping dam- age. Contact the carrier promptly if damage is dis- covered.
2.Unseal the box and inspect the contents carefully. There should not be any loose or damaged parts in the bag.
3.Compare the packing slip against all items included in the box. Any shortages or other inspection prob- lems should be reported immediately.
4.Store the box and packing materials in a safe place for future use. Graco recommends that all packing materials be saved in case the unit needs to be shipped again.
Repair and Repacking the Product
When the PrecisionSwirl orbital dispenser requires ser- vice, it is the purchaser’s responsibility to have the unit repaired. As an option, the purchaser can have the unit repaired by an authorized Graco distributor. For addi- tional information, read the following subsections.
PrecisionSwirl components are customarily serviced by the purchaser or an authorized Graco technician. When service is required, follow the Service procedures in this manual.
Service by an Authorized Graco Distributor
The PrecisionSwirl orbital dispenser can be serviced by an authorized Graco distributor after completing a Return Goods Authorization (RGA) form. The purchaser must
1.Retrieve the original box and packing materials for shipment.
2.Place the orbital dispenser and any loose or dam- aged parts in the same bag and box used in the original shipment. Fill the box with filler material to minimize the possibility of damage.
3.Seal the box tightly to protect its contents and pre- vent shipping damage.
4.Insure your shipment for the proper replacement value of its contents.
5.Ship the orbital dispenser freight prepaid to your authorized Graco distributor for service.
8 | 310554V |
