Daily Gun Maintenance
Daily Gun Maintenance
WARNING
Follow Pressure Relief Procedure, page 13 when you stop spraying and before cleaning, checking, ser- vicing, or transporting equipment. Read warnings, page 3.
CAUTION
Methylene chloride with formic or propionic acid is not recommended as a flushing or cleaning solvent with this gun as it will damage aluminum and nylon compo- nents.
CAUTION
Solvent left in gun air passages could result in a poor quality paint finish. Do not use any cleaning method which may allow solvent into the gun air passages.
Do not point the gun up while cleaning it.
Do not wipe the gun with a cloth soaked in solvent; ring out the excess.
Do not immerse the gun in solvent.
Do not use metal tools to clean the air cap holes as this may scratch them; scratches can distort the spray pattern.
General maintenance
✓ Relieve the pressure. | ✓ Check for any fluid leakage from the gun and fluid |
| hoses. |
✓Clean the fluid and air line filters daily.
✓ Flush the gun before changing colors and whenever you are done operating the gun.
14 | 310692D |
