Flushing and cleaning
Gravity and Siphon Feed Guns
1.For packages that include fluid cups, use the follow- ing chart for flushing and cleaning instructions.
Cup attachment | Instruction Manual |
|
|
3M™ PPS™ | 310693 |
Gravity Cup | 308792 |
|
|
Siphon Cup | 308792 |
|
|
Pressure Cups | 308791 |
|
|
2.Continue to step 8 to perform daily cleaning of the Delta Spray XT gun.
Pressure Feed Guns
WARNING
Follow Pressure Relief Procedure, page 13 when you stop spraying and before cleaning, checking, ser- vicing, or transporting equipment. Read warnings, page 3.
1.Relieve the pressure, page 13.
2.Disconnect the fluid supply hose and air supply hose from the gun.
ti4944a
ti4945a
FIG. 13
Daily Gun Maintenance
3. Connect the solvent supply hose to the gun.
ti4854a
FIG. 14
4.Hold metal part of gun against a grounded metal container, trigger, and flush the gun with solvent until all traces of paint are removed from the gun passages.
ti4836a
FIG. 15
5.Turn off the solvent supply.
6.Relieve the pressure.
7.Disconnect the solvent supply hose from the gun.
ti4944a
FIG. 16
310692D | 15 |
