Technical Data
| MAGNUM ProX7 | MAGNUM ProX9 |
| (Series B) | (Series B) |
|
|
|
Working pressure range | ||
|
|
|
Electric motor | 5.8A | 9.4A |
| (open frame, permanent magnet DC) | (open frame, permanent magnet DC) |
|
|
|
Operating horsepower | 3/4 | 7/8 |
|
|
|
Maximum delivery (with tip) | 0.34 gpm (1.29 lpm) | 0.38 gpm (1.44 lpm) |
|
|
|
Paint hose | 1/4 in. x 50 ft (6.4 mm x 15 m) | |
|
|
|
Maximum tip hole size | 0.017 in. (0.43 mm) | 0.019 in. (0.48 mm) |
|
|
|
Weight, sprayer only | 33 lb (15 kg) | |
|
| |
Weight, sprayer, hose & gun | 36 lb (16 kg) | |
|
|
|
Dimensions (Upright): |
|
|
|
|
|
Length | 23.75 in. (60.32 cm) | |
|
| |
Width | 17.5 in. (44.45 cm) | |
|
| |
Height | 36.5 in. (92.71 cm) | |
|
|
|
Dimensions (Folded Handle): |
|
|
|
|
|
Length | 23.25 in. (59.05 cm) | |
|
| |
Width | 17.5 in. (44.45 cm) | |
|
| |
Height | 22.00 in. (55.88 cm) | |
|
| |
Power cord | 16 AWG, | |
|
| |
Fluid inlet fitting | 3/4 in. internal thread (standard garden hose thread) | |
|
| |
Fluid outlet fitting | 1/4 NPSM external thread | |
|
| |
Inlet screen (on suction tube) | 35 mesh (450 micron) | |
|
| |
Wetted parts, pump & hose | stainless steel, brass, leather, | |
| (UHMWPE), carbide, nylon, aluminum, PVC, polypropylene, fluroelastomer | |
|
| |
Wetted parts, gun | aluminum, brass, carbide, nylon, plated steel, stainless steel, | |
| UHMWPE, zinc | |
|
| |
Generator requirement | 1500 Watt minimum | |
|
| |
Electrical power requirement | 120 Vac, 60 Hz, 15A, 1 phase | |
|
| |
Storage temperature range ◆❖ | ||
|
| |
Operating temperature range ✔ | 40° to 115°F (4° to 46°C) | |
|
|
|
◆When pump is stored with
✔ Changes in paint viscosity at very low or very high temperatures can affect sprayer performance.
312001R | 31 |