Cleaning InstaClean™ Fluid Filter (ProX Sprayers Only)
The InstaClean Fluid Filter prevents particles from entering paint hose. After each use, remove and clean it to insure peak performance.
Shutdown and Cleaning
4.Tighten outlet fitting and reconnect hose (a) to sprayer. Use two wrenches to tighten securely.
a
ti9674b
1.Relieve pressure, page 10.
2.
a. | Disconnect airless |
| b |
| spray hose (a) from |
| |
|
|
| |
| sprayer | c |
|
b. | Unscrew outlet fitting |
|
|
| (b). | ti9347a | a |
|
|
|
c.Remove InstaClean Fluid Filter (c).
3.Check InstaClean Fluid Filter (c) for debris. If needed, clean filter with water and a soft brush.
a.Install closed (square) end of InstaClean Fluid Filter (c) in sprayer.
b. Screw outlet fitting (b) |
|
into sprayer. | c |
b
ti9347a
Cleaning Gun
•Clean gun fluid filter (d) with water or flushing solvent and a brush every time you flush the system. Replace gun filter if damaged.
•Remove tip and guard and clean with water or flushing solvent. A soft brush can be used to loosen and remove dried on material if needed.
•Wipe paint off outside of gun using a soft cloth moistened with water or flushing solvent.
d
ti9668a
ti9671a
312001R | 21 |
