Shutdown and Cleaning
Power Flush
Power flushing is a faster method of flushing. It can only be used after spraying
1.Relieve pressure, page 10.
2.Remove tip and guard assembly from gun and place in waste pail.
3.Place empty waste and paint pails side by side.
10.Unscrew inlet screen from suction tube. Place inlet screen in waste pail.
ti2040a
11.Connect garden hose to suction tube with Power Flush attachment.
Leave prime tube in waste pail.
ti9726a
4.Lift suction tube and prime tube from paint pail. Let them drain into paint for a while.
5.Place suction and prime tube in waste pail.
6.Turn Pressure Control knob to the Prime/Clean setting.
ti9344a
7.Screw power flush attachment to garden hose. Close valve.
ti9413a
8.Turn on water. Open valve. Rinse paint off suction tube, prime tube and inlet screen.
9.Turn lever to close power flush attachment.
ti9727a
ti2042a
12. Turn power switch ON.
ti5580a
13.Open lever on Power Flush attachment.
OPEN
ti2043a
14.Circulate water through sprayer, into waste pail, for 20 seconds.
15. Turn power switch OFF.
ti2018a
312001R | 19 |
