Technical Data
Technical Data
Maximum fluid working pressure. . . . . . . . . . . . . . . 125 psi (0.86 MPa, 8.6 bar)
Air pressure operating range . . . . . . . . . . . . . . . . . .
Air consumption at 70 psi (0.48 MPa, 4.8 bar),
20 gpm (76 lpm) . . . . . . . . . . . . . . . . . . . . . . . . 25 scfm Maximum
Fluid displacement per cycle . . . . . . . . . . . . . . . . . . 0.17 gal. (0.64 liters)
Maximum suction lift . . . . . . . . . . . . . . . . . . . . . . . . 16 ft (4.9 m) dry, 29 ft (8.8 m) wet Maximum size pumpable solids. . . . . . . . . . . . . . . . 1/8 in. (3.2 mm)
Sound Power*
at 70 psi (0.48 MPa, 4.8 bar) and 50 cpm . . . . . 78 dBa at 100 psi (0.7 MPa, 7.0 bar) and full flow . . . . . 90 dBa
Sound Pressure**
at 70 psi (0.48 MPa, 4.8 bar) and 50 cpm . . . . . 84 dBa at 100 psi (0.7 MPa, 7.0 bar) and full flow . . . . . 96 dBa Operating temperature range . . . . . . . . . . . . . . . . . see page 23
Air inlet size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2 npt(f) Fluid inlet size
Aluminum (1050A). . . . . . . . . . . . . . . . . . . . . . . 1 in. npt(f) or 1 in. bspt
Plastic (1050P and 1050C) . . . . . . . . . . . . . . . . 1 in. raised face ANSI/DIN flange Stainless Steel (1050S) . . . . . . . . . . . . . . . . . . . 1 in. npt(f) or 1 in. bspt
Fluid outlet size
Aluminum (1050A). . . . . . . . . . . . . . . . . . . . . . . 1 in. npt(f) or 1 in. bspt
Plastic (1050P and 1050C) . . . . . . . . . . . . . . . . 1 in. raised face ANSI/DIN flange Stainless Steel (1050S) . . . . . . . . . . . . . . . . . . . 1 in. npt(f) or 1 in. bspt
Weight
Aluminum (1050A). . . . . . . . . . . . . . . . . . . . . . . 23 lb. (10.5 kg) Plastic (1050P and 1050C) . . . . . . . . . . . . . . . . 18 lb. (8.2 kg) Stainless Steel (1050S)
with conductive polypropylene center . . . . 36.3 lb. (16.5 kg) with polypropylene center . . . . . . . . . . . . . 37.3 lb. (16.9 kg) with aluminum center . . . . . . . . . . . . . . . . 41.4 lb. (18.8 kg)
Wetted parts
Aluminum (1050A). . . . . . . . . . . . . . . . . . . . . . . aluminum and material(s) chosen for seat, ball, and diaphragm options
Plastic (1050P and 1050C) . . . . . . . . . . . . . . . . polypropylene and material(s) chosen for seat, ball, and diaphragm options
Stainless Steel (1050S) . . . . . . . . . . . . . . . . . . . stainless steel and material(s) chosen for seat, ball, and diaphragm options
Aluminum (1050A). . . . . . . . . . . . . . . . . . . . . . . aluminum, coated carbon steel Plastic (1050P and 1050C) . . . . . . . . . . . . . . . . stainless steel, polypropylene
Stainless Steel (1050S) . . . . . . . . . . . . . . . . . . . stainless steel, polypropylene or aluminum (if used in center section)
*Sound power measured per
**Sound pressure was tested 3.28 ft (1 m) from equipment.
All trademarks mentioned in this manual are the property of their respective owners.
22 | 312877C |
