Installation

Install an Expansion Kit

Expansion Kits are available to add valves or manifolds to your system. For each additional color/catalyst desired, order a Non-IS Expansion Kit and a corresponding IS Expansion Kit. See Expansion Kits, page 69 for available kits.

NOTE: Remember that you may need up to 6 Non-IS control modules and up to 2 IS control modules.

Follow Steps 1–7 to install solenoids, manifolds, and valves, first in the Non-IS area, and then in the IS area.

1.Remove electrical power from the system.

2.Relieve pressure as described in your PD2K Operation Manual.

3.Open the control module cover. Install the solenoid(s) and air fitting(s) at the appropriate position(s) in the solenoid manifold. See Setup the Modules, page 13. Connect one end of the tubing to the solenoid’s air fitting.

4.Connect the solenoid wires to the appropriate pins on the control module board. See Electrical Schematics, page 36.

NOTE: If installing a one valve kit, it is not necessary to disassemble the manifold stack as shown in the figure. Skip step 5 and go on to step 6.

5.If your kit is adding a manifold block (1), remove the screws (10). Slide the existing manifolds off the rods (15, 16), keeping the manifolds in the correct order. Install the new manifold block (1). The new block must be in the bottom position to maintain correct location of the solvent and dump valves. Screw the rods (16) included in the kit into the existing rods. Slide the existing manifold blocks onto the rods, being sure that they are in the same positions as before. Ensure all o-rings (6, 17) are in place, then install the screws (10).

6.Install the valves as follows:

a.For a one valve kit, remove the plug

(4) and o-ring (2). Install a new o-ring (2), the valve (3), and retainer (5), using the valve installation tool. See Replace a Color Valve, page 43.

b.For a manifold kit with one valve, install the o-ring (2), valve (3), and retainer (5), using the valve installation tool. See Replace a Color Valve, page 43. Install the plug (4) in the unused manifold port.

c.For a manifold kit with two valves, install the o-rings (2), valves (3), and retainers (5), using the valve installation tool. See Replace a Color Valve, page 43.

7.Install the o-ring(s) (12) and fluid fitting(s) (13).

8.For each color/catalyst, connect fluid lines from the source to the input color/catalyst stack. Then, connect fluid lines from each output valve to the corresponding remote color change valve.Install the air fitting(s) (14).

9.Connect the tubing from the solenoid valve(s) (see step 3) to the fitting(s) in both the IS and and Non-IS areas.

10.Install the control module covers.

11.Return the unit to service.

30

333282B

Page 30
Image 30
Graco 333282B important safety instructions Install an Expansion Kit

333282B specifications

The Graco 333282B is a high-performance airless paint sprayer, designed specifically for both DIY enthusiasts and professional painters who require efficiency and precision. This versatile sprayer is suitable for a variety of projects, including home renovations, commercial applications, and creative crafts.

One of the standout features of the Graco 333282B is its robust TrueLife airless technology, which allows for a smooth and even finish without the hassles associated with traditional paintbrushes or rollers. This technology minimizes overspray while ensuring consistent paint delivery, making it an optimal choice for achieving professional-quality results.

In terms of power, the Graco 333282B incorporates a reliable electric motor that provides enough strength to handle thick materials, such as latex paints and stains. Its powerful motor ensures that users can cover large areas quickly, reducing the time spent on projects. Furthermore, the unit features an adjustable pressure control, allowing users to tailor the flow rate to their specific needs, which enhances versatility across various surfaces and types of paint.

The sprayer's design emphasizes user-friendliness. It is lightweight and portable, making it easy to transport and maneuver around different workspaces. The innovative design also incorporates an easy-to-clean tip, allowing for straightforward maintenance and ensuring longevity in performance. Additionally, the Graco 333282B is equipped with a flexible hose that accommodates movement without compromising pressure, making it easier to reach tight spaces and high walls.

Safety is also a priority, as the Graco 333282B features a built-in tip guard that protects users from accidental injuries when the sprayer is not in use. The unit is intentionally engineered for stability, minimizing the chances of tipping over during operation.

Overall, the Graco 333282B combines advanced technology, user-friendly features, and durability, making it an excellent choice for anyone looking to achieve exceptional painting results efficiently. Whether tackling large-scale projects or smaller DIY tasks, this sprayer delivers the performance necessary to get the job done right.