List of Models | Graco 333492B instruction

INSTRUCTIONS

SDMM8 Manual Meter and SDMP8 Preset Meter

333492B

EN

For metered dispense of petroleum-based lubricants, oils and 50:50 antifreeze/water mix fluids only.

For professional use only.

Maximum Working Pressure: 1500 psi (10 MPa, 103 bar)

List of Models page 2

Important Safety Instructions

Read all warnings and instructions in this manual. Save these instructions.

Image 1

Graco 333492B important safety instructions List of Models, Important Safety Instructions

Contents

List of Models Important Safety Instructions SDMM8 Manual Bare Meters ModelsSDMM8 Manual Meters with Nozzle and Extension Packages Model Number Model Description Inlet SDMP8 Preset Meters SDMP8 Preset Meters with Nozzle and Extension Packages Fire and Explosion Hazard Equipment Misuse Hazard Key Typical Installation Pressure Relief Procedure InstallationGrounding Component Identification Installation Procedure Pre-Installation ProcedureInstalling Meter FIG Flushing Installation Operation Preset Automatic ShutoffManual Shutoff Valve Problem Cause Solution Troubleshooting Cleaning / Repairing the Fluid Section Service SDMM8 Manual Meter Counter Section Repair Disassembly Reassembly SDMP8 Preset Meter Counter Section Repair Remove the entire counter assembly 31 Models 24U959, 24U960, 24U961, 24U956, 24U957, 24U958 SDMM8 Manual Meter Parts Description Qty SDMM8 Manual Meter Parts 43a SDMP8 Preset Meter Parts SDMP8 Preset Meter Parts Needle Kit No Description Nozzle 101 and Extension 102 Kits Description Qty Fluid Type Nozzle 101 Parts Manual and Preset Meter Metric Technical Data Manual Meter Preset Meter Dimensions Graco Information Graco Extended Meter Warranty