Graco 3A0156B important safety instructions Switch Tip Installation, Spray

Switch Tip Installation

1.Use spray tip (A) to insert OneSeal™ (B) into guard (C).

C

B A

ti13023a

2. Insert Switch Tip.

ti13024a

3. Screw assembly onto gun. Tighten.

ti2710a

Switch Tip Installation

Spray

1.Spray test pattern. Increase pressure to eliminate heavy edges. Use smaller tip size if pressure adjust- ment can not eliminate heavy edges.

ti13030a

2.Hold gun perpendicular, 10-12 in. (25-30 cm) from surface. Spray back and forth. Overlap by 50%. Trig- ger gun after moving and release before stopping.

ti13025a

Clearing Tip Clog

1.Release trigger, put safety ON. Rotate SwitchTip. Take safety OFF. Trigger gun to clear clog. Never point gun at your hand or into a rag!

ti10166a ti13033a ti10167a

2.Put safety ON. Return SwitchTip to original position. Take safety OFF and continue spraying.

ti10166a ti13034a ti10167a

3A0156B 11