Graco deluxe series manual Installing the car seat

Only use this car seat on vehicle seats with seat backs that lock in place. Seats without latches, that fold forward or pivot freely should not be used.

Only use this car seat on vehicle seats that are fully padded and are free of sharp objects.

Installing the car seat

After fitting the harness to your baby and determining which vehicle seat location is best, you are ready to install your car seat. The installation instructions vary depending on whether or not you are using the base. Refer to the proper section below:

Step 1.

Place your car seat (or base without the seat) into a forward-facing vehicle seat with no air bag and with an approved type of seat belt. Face your car seat or base toward the rear of the vehicle. Check that the car seat handle is up.

DO NOT use car seat in a vehicle with the handle in the sitting (down) position.

NEVER face this car seat forward. Serious injury or death can result if this car seat is used facing forward.

26