33 Look straight on at the level indicator

36 Step 3.

to check it. If the level indicator shows

Push the now mated shoulder buckle

ONLY blue, then the safety seat is

parts into the buckle housing until you

properly leveled.

hear it click home. CHECK that

 

If the safety seat is too upright or too

buckle is secure.

reclined showing any orange in the

DO NOT allow harness

level indicator, shift the car seat until

straps to become twisted. Keep

level indicator shows ONLY blue.

them flat against your baby’s body.

 

Securing your baby

34Step 1.

Drape harness straps over

seat back. Place baby in seat. (Make sure baby’s back and bottom are flat against seat.)

35Step 2.

Fit the two shoulder strap buckle parts together.

37

38

Step 4.

To tighten the harness, pull the slack adjustment strap in front of seat.

CHECK that harness is snug. You should not be able to insert more than two fingers between the harness and your baby.

Step 5.

To open the harness,

If handle is up, move it to a down position.

Press red button on buckle to open harness.

30

Page 30
Image 30
Graco deluxe series manual Securing your baby