27
WITHOUT BASE:
Step 2.
Place shoulder belt around the back
of the car seat exactly as shown,
making sure torun it through the
center guides on the back of the
seat and below the notch opposite
the shoulder belt origin.
Put lap section of belt over car seat
and under the two belt hooks.
Buckle the vehicle belt.
Belt hooks
Centre guides
Notch opposite shoulder belt origin
Step 3.
Push car seat down into vehicle seat.
Help the retractor to take up all the
vehicle belt slack.
WITH BASE:
Step 1.
Lift the bottom of the load leg up untill
it clicks into place.
Caution: Keep fingers clear of
moving parts.
Step 2.
Place base on vehicle seat. Squeeze
load leg adjustment button, raise or
lower the load leg to proper height.
Make sure the load leg is secure by
pressing down on the front of the
base.
Do not place base with loadleg on a
ledge. If this occurs and the vehicle
seat is adjustable, move it forward so
that the foot is on the vehicle floor.
Correct
Incorrect
ABC1921202223