Graco deluxe series manual Check that tray or arm bar is securely attached to pushchair

Step 2. 42 Step 5.

40

41

Recline the pushchair seat back to lowest position.

Check that tray or arm bar is securely attached to pushchair.

Step 3.

Place carrier into pushchair so notches in rockers fit over edge of arm bar or tray. Push down so carrier latches onto arm bar or tray. Pull up on carrier to be sure it is securely attached.

Step 4.

Grasp the strap attached to the seat back and feed the free end of it through the D-ring on the end of the slack adjustment belt. Fold it back onto itself and attach the VELCRO® firmly.

To remove carrier from pushchair,

!Detach VELCRO® webbing from slack adjustment belt D-ring.

!Pull up on the release handle at back of carrier to release attachment latch holding carrier to tray or arm bar.

!Lift carrier out of pushchair.

WARNING: NEVER allow more than one baby in the travel system at one time.

WARNING: ALWAYS fasten the harness of your car seat/ carrier securely on your infant, regardless of how it is being used.

32