WARNING
FIRE AND EXPLOSION HAZARD
Improper grounding, poor ventilation, open flames or sparks can cause a hazardous condition and result in a fire or explosion and serious injury.
DIf there is any static sparking or you feel an electric shock while using this equipment, stop spray- ing immediately. Do not use the equipment until you identify and correct the problem.
DProvide fresh air ventilation to avoid the buildup of flammable fumes from solvents or the fluid being sprayed.
DKeep the spray area free of debris, including solvent, rags, and gasoline.
DDisconnect all electrical equipment in the spray area.
DExtinguish all open flames or pilot lights in the spray area.
DDo not smoke in the spray area.
DDo not turn on or off any light switch in the spray area while operating or if fumes are present.
DDo not operate a gasoline engine in the spray area.
DGround the sprayer to a true earth ground with the ground wire and clamp (supplied).
DUse only electrically conductive hoses.
MOVING PARTS HAZARD
Moving parts can pinch or amputate your fingers.
DKeep clear of all moving parts when starting or operating the sprayer.
DBefore servicing the equipment, follow the Pressure Relief Procedure on page 10 to prevent the equipment from starting unexpectedly.
NOTE: This is an example of the DANGER label on your sprayer. This label is available in other languages, free of charge. See page 37 to order.
FIRE AND | SKIN INJECTION |
EXPLOSION HAZARD | HAZARD |
Spray painting, flushing or cleaning equipment with flammable | Liquids can be injected into the body by high pressure airless |
liquids in confined areas can result in fire or explosion. | spray or leaks - especially hose leaks. |
Use outdoors or in extremely well ventilated areas. Ground | Keep body clear of the nozzle. Never stop leaks with any part of the |
equipment, hoses, containers and objects being sprayed. | body. Drain all pressure before removing parts.Avoid accidental |
Avoid all ignition sources such as static electricity from plastic | triggering of gun by always setting safety latch when not spraying. |
drop cloths, open flames such as pilot lights, hot objects such as | Never spray without a tip guard. |
cigarettes, arcs from connecting or disconnecting power cords | In case of accidental skin injection, seek immediate |
or turning light switches on and off. | “Surgical Treatment”. |
Failure to follow this warning can result in death or serious injury. | Failure to follow this warning can result in amputation or serious |
| injury. |
READ AND UNDERSTAND ALL LABELS AND INSTRUCTION MANUALS BEFORE USE
4 308972
