Graham Field 14423-4, 14423-2, 14423-8 user manual Pocket Doppler WATER-RESISTANT Probes, Battery

POCKET DOPPLER WATER-RESISTANT PROBES

The 2.0 MHz, 4.0 MHz, and 8.0 MHz water-resistant probes connect to the main unit of the Grafco Pocket Doppler via the probe socket. The following table lists and describes the main information on each probe's label in order of ap- pearance:

Pocket Doppler Water-Resistant Probe Label Table

Picture of Probe

Probe Label	2.0 MHz	4.0 MHz	8.0 MHz
Text	Water-Resistant	Water-Resistant	Water-Resistant
	Probe	Vascular	Vascular
		Probe *	Probe *
CD	Continuous Wave Doppler
X.0 (Central	Central	Central	Central
Frequency)	frequency =	frequency =	frequency =
	2.0 MHz	4.0 MHz	8.0 MHz
A	Probe version number
SNxxxxx:	Probe Serial Number
Water-Resistant	The probe is water-resistant
IPX8	Water Ingress Protection Code, which indicates
(Water-Resistant)	this probe can work continuously for 5 hours when
	immersed in water up to one meter deep.

* Vascular probes are used to monitor arteries and veins

BATTERY

See Section 5, SETUP, for battery installation and replace- ment instructions.

WARNING: Use only 9V alkaline batteries (IEC Type No. 6LR61/6LF22 or equivalent) in this device.

14423-INS-LAB-RevD11 17