ASSEMBLY

Base and mast assembly

1.Remove the locking pin from the mast sleeve located on the rear of the base.

remove locking pin

2. Install the L-inserts in the base.

install L-inserts

3.With the boom pointed in the same direction as the base legs, insert the mast into the sleeve.

4.Insert the locking pin through the holes of the sleeve and mast.

install locking pin

5.Secure the locking pin by attaching the locking cable to the other end of the locking pin.

secure locking pin

6.Screw the two mast attachment bolts into the holes in the sleeve of the base.

7.Use the supplied hex wrench to tighten the bolts.

install mast bolts

LF1031-INS-LAB-RevD12

9

Page 9
Image 9
Graham Field lf 1031 user manual Assembly, Base and mast assembly