LF1041 only: electrical power connections
The control box is the heart of the electrical system.
The battery charger and battery are plugged into the control box via
The hand control pendant and actuator / motor are plugged into the control box via the lower control box connectors, shown at right.
When standing behind the patient lift, the hand control pendant connection is on the far left of the control box.
1.Ensure the marks on the control box and the hand control pendant plug are aligned, then firmly insert the hand control pendant plug as shown at top right.
2.Immediately to the right of the hand control pendant connection is the actuator / motor connection. Insert the actuator / motor plug firmly in its receptacle (this plug has nothing to align).
3.Plug the power cord into its connector on the battery charger as shown at right.
4.Slide the power cord hook onto the battery charger as shown at right.
hand control pendant connector
actuator / motor connector
control box
hand control pendant plug
control box connectors
power cord
connector
and plug
plug in power cord
power cord hook
battery
charger
attach power cord hook
5.Snap the power cord hook onto the battery charger as shown at right.
snap on power cord hook
6.Coil the power cord on the cord hook as shown at right.
7.Before proceeding, ensure that all plugs are seated firmly in the proper receptacles.
power cord
coil power cord on hook
| 12 |
