HandyTone-486 User Manual

Grandstream Networks, Inc.

1.A presses FLASH (on the analog phone, or Hook Flash for old model phones) to get a dial tone

2.A then dial C’s number then # (or wait for 4 seconds), A and C now in conversation.

3.Then A can hang up.

Note: When intended Transfer failed, if A hangs up, the HandyTone 486 will ring user A again to remind A that B is still on the call, by pressing FLASH or Hook again will restore conversation between A and B.

5.2.5Send and Receive PSTN Calls Through PSTN Line Port

Starting with HandyTone 486 Rev 2.0, user will be able to send and receive calls from PSTN. To receive PSTN calls, simply make phone off hook when the analog phone rings. To make a PSTN call, simply press *00 to get the PSTN line dial tone and dial the PSTN number.

5.3Call Features

5.3.1Call Features Table

Following table shows the call features of HandyTone-486.

Key

Call Features

*30

Block CallerID (for all-config change)

*31

Send CallerID (for all-config change)

*67

Block CallerID (per call)

*82

Send CallerID (per call)

*50

Disable Call Waiting (for all-config change)

*51

Enable Call Waiting (for all-config change)

*70

Disable Call Waiting. (Per Call)

*71

Enable Call Waiting (Per Call)

*72

Unconditional Call Forward.

 

To use this feature, dial “*72” and get the dial tone. Then

 

dial the forward number and hang up.

*73

Cancel Unconditional Call Forward

 

To cancel “Unconditional Call Forward”, dial “*73” and get

 

the dial tone, then hang up.

*90

Busy Call Forward

 

To use this feature, dial “*90” and get the dial tone. Then

 

dial the forward number and hang up.

*91

Cancel Busy Call Forward

 

To cancel “Busy Call Forward”, dial “*91” and get the dial

 

tone, then hang up

*92

Delayed Call Forward

 

To use this feature, dial “*92” and get the dial tone. Then

11

Page 11
Image 11
Grandstream Networks 486 user manual Send and Receive Pstn Calls Through Pstn Line Port, Call Features Table