Grandstream Networks 486 user manual Saving the Configuration Changes

HandyTone-486 User Manual Grandstream Networks, Inc.

6.2.4Saving the Configuration Changes

Once a change is made, the user should press the “Update” button in the Configuration Menu. The HandyTone ATA will then display the following screen to confirm that the changes have been saved.

Grandstream HandyTone-486 Configuration Update Status

Your configuration changes have been saved.

They will take effect on next reboot.

Click to view your changes

Users are recommended to power cycle the HandyTone-486 after seeing the above message.

6.2.5Rebooting the HandyTone-486 from remote

The administrator of the HandyTone-486 can remotely reboot the HandyTone ATA by pressing the “Reboot” button at the bottom of the configuration menu. Once done, the following screen will be displayed to indicate that rebooting is underway.

Grandstream HandyTone-486 Rebooting Status

The HandyTone-486 is rebooting now...

You may relogin by clicking on the link below in 30 seconds.

Click to relogin

At this point, the user can relogin to the HandyTone ATA after waiting for about 30 seconds.

24