MAC Address | The device ID, in HEX format. This is very important ID for ISP |
| troubleshooting. |
WAN IP Address | This field shows WAN port IP address. |
Product Model | This field contains the product model info. |
Software Version | Program: This is the main software release, its number is always |
| used for firmware upgrade. |
| Bootloader: This is normally not changed. |
| HTML: This is the user interface, normally not changed. |
| VOC: This is the codec program, normally not changed. |
Detected NAT Type | This field shows what kind NAT the HandyTone is connected to via its |
| WAN port. It is based on STUN protocol. |
End User | This contains the password to access the Web Configuration Menu. |
Password | This field is case sensitive. |
IP Address | There are 2 modes under which the HandyTone ATA can operate: |
| - If DHCP mode is enabled, then all the field values for the Static IP |
| mode are not used (even though they are still saved in the Flash |
| memory.) The HandyTone ATA will acquire its IP address from the |
| first DHCP server it discovers from the LAN it is connected. |
| To use the PPPoE feature set the PPPoE account settings. The |
| HandyTone will attempt to establish a PPPoE session if any of the |
| PPPoE fields is set. |
| - If Static IP mode is selected, then the IP address, Subnet Mask, |
| Default Router IP address, DNS Server 1 (primary), DNS Server 2 |
| (secondary) fields will need to be configured. These fields are reset to |
| zero by default. |
Time Zone | This parameter controls how the displayed date/time will be adjusted |
| according to the specified time zone. |
Daylight Savings | This parameter controls whether the displayed time will be daylight |
Time | savings time or not. If set to Yes, then the displayed time will be 1 |
| hour ahead of normal time. |
Cloned WAN MAC | Allow the user to set a specific MAC address. Set in Hex format |
Address: |
|
LAN Subnet Mask | Sets the LAN subnet mask. Default value is 255.255.255.0 |
16
