Grandstream Networks 486 user manual Dmz Ip, Advanced User Configuration

HandyTone-486 User ManualGrandstream Networks, Inc.

LAN DHCP Base IP: Base IP for the LAN port, which function as a Gateway for the subnet.

	Default value is 192.168.2.1
DHCP IP Lease	Value is set in units of hours. Default value is 120hr (5 Days.) The
Time:	time IP address are assigned to the LAN clients
DMZ IP:	Forward all WAN IP traffic to a specific IP address if no matching port
	is used by HandyTone-486 itself or in the defined port forwarding.
Port Forwarding:	Allow the user to forward a matching (TCP/UDP) port to a specific
	LAN IP address with a specific (TCP/UDP) port.

6.2.3Advanced User Configuration

To login to the Advanced User Configuration page, follow the instruction in section 6.2.1 to get to the following login page. The password is case sensitive and the factory default password for Advanced User is ‘admin’.

Welcome to Grandstream HandyTone-486

Password

Login

Advanced User configuration page includes not only the end user configuration, but also some advanced configuration such as SIP configuration, Codec selection, NAT Traversal

Setting and other miscellaneous configuration. Following is the snap shot of the configuration page.

Grandstream HandyTone 486 Configuration

MAC Address:	00.0B.82.01.29.DA
Product Model:	HT486
Software Version:	Program--1.0.5.16 Bootloader--1.0.0.21 HTML--1.0.0.41 VOC--1.0.0.7
	detected NAT type is full cone
Admin Password:	(admin user password to configure this IP phone)
End User Password:	(end user password to configure this IP phone)
WAN IP Address:	dynamically assigned via DHCP (default) or PPPoE

17