End User Password

 

Password to access the Web Configuration Menu. This field is case sensitive

 

 

 

 

 

with a maximum length of 25 characters.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Web Port

 

 

By default, HTTP uses port 80. This field is for customizable web port.

 

 

 

 

 

 

 

 

 

 

 

 

 

Telnet Server

 

Default is set to YES.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

IP Address

 

 

There are two modes to operate the HT–502:

 

 

 

 

 

DHCP mode: all the field values for the Static IP mode are not used (even

 

 

 

 

 

though they are still saved in the Flash memory.) The HT–502 acquires its IP

 

 

 

 

 

address from the first DHCP server it discovers from the LAN it is connected.

 

 

 

 

 

Using the PPPoE feature: set the PPPoE account settings. The HT–502 will

 

 

 

 

 

establish a PPPoE session if any of the PPPoE fields is set.

 

 

 

 

 

Static IP mode: configure the IP address, Subnet Mask, Default Router IP

 

 

 

 

 

address, DNS Server 1 (primary), DNS Server 2 (secondary) fields. These fields

 

 

 

 

 

are set to zero by default.

 

 

 

 

 

 

 

 

 

 

 

 

 

DHCP hostname

 

This option specifies the name of the client. This field is optional but may be

 

 

 

 

 

required by some Internet Service Providers. Default is blank.

 

 

 

 

 

 

 

 

 

 

 

 

 

DHCP domain

 

This option specifies the domain name that client should use when resolving

 

 

 

 

 

hostnames via the Domain Name System. Default is blank.

 

 

 

 

 

 

 

 

 

 

 

 

 

DHCP vendor class

 

Used by clients and servers to exchange vendor-specific information. Default is

 

 

ID

 

 

HT500.

 

 

 

 

 

 

 

 

 

 

 

 

 

PPPoE account ID

 

PPPoE username. Necessary if ISP requires you to use a PPPoE (Point to

 

 

 

 

 

Point Protocol over Ethernet) connection.

 

 

 

 

 

 

 

 

 

 

 

 

 

PPPoE password

 

PPPoE account password.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PPPoE

Service

 

This field is optional. If your ISP uses a service name for the PPPoE connection,

 

 

Name

 

 

enter the service name here. Default is blank.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Time Zone

 

 

Controls how the date/time is displayed according to the specified time zone.

 

 

 

 

 

 

 

 

 

 

 

 

 

Grandstream Networks, Inc.

HT-502 User Manual

Page 19 of 35

 

Firmware 1.0.0.39

Last Updated: 03/2007

Page 19
Image 19
Grandstream Networks HT-502 End User Password, Web Port, IP Address, Dhcp hostname, Dhcp domain, Dhcp vendor class, Name