Configuring HT503 through Voice Prompt | Grandstream Networks

CONFIGURATION GUIDE

Configuring HT503 through Voice Prompt

DHCP MODE

Follow Table 4 with voice menu option 01 to enable HT503 to use DHCP.

STATIC IP MODE

Follow Table 4 with voice menu option 01 to enable HT503 to use STATIC IP mode, then use option 02, 03, 04 to set up HT503’s IP, Subnet Mask, Gateway respectively.

FIRMWARE SERVER IP ADDRESS

Select voice menu option 13 to configure the IP address of the firmware server.

CONFIGURATION SERVER IP ADDRESS

Select voice menu option 14 to configure the IP address of the configuration server.

UPGRADE PROTOCOL

Select voice menu option 15 to choose firmware and configuration upgrade protocol. User can choose between TFTP, HTTP and HTTPS.

FIRMWARE UPGRADE MODE

Select voice menu option 17 to choose firmware upgrade mode. There are three options: 1) always check, 2) check only when pre/suffix changes, and 3) never upgrade

WAN PORT WEB ACCESS

Select voice menu option 12 to enable WAN Port Wed Access of the device configuration pages.

Grandstream Networks, Inc.	HT503 User Manual	Page 17 of 38
	Firmware 1.0.4.2	Last Updated: 06/2011

Image 17

Grandstream Networks user manual Configuring HT503 through Voice Prompt, Static IP Mode

Contents

Grandstream Networks, Inc Safety Compliances Warranty Table of Figures Welcome Equipment Packaging Connecting the HT503 WAN LED Power LEDLAN LED PHONE/ Line LED Software Features Overview LED Hardware Specification Main Menu To reset the HT to take affect the new IP addressUnderstanding HT503 Voice Prompt Phone or Extension Numbers Placing a Phone Call Call Transfer Call HoldCall Waiting Pstn Pass Through Way Conferencing PSTN-to-VoIP Calls VoIP-to-PSTN Calls Forward Calls to Pstn Route Calls to Pstn Fax Support Forward Calls to VoIPOne Stage Dialing Flash/Hook Enable Srtp Disable SrtpBlind Transfer Static IP Mode Configuring HT503 through Voice Prompt Access the Web Configuration Menu Configuring HT503 with Web Browser DND NATFXS FXO MTZ+6MDT+5 DMZ IP Firmware Upgrade Admin PasswordLayer 3 QoS Layer 2 QoS ACS URL HTTP/HTTPS Life Line Mode Disable Direct IPConfiguration Lock Keypad Authentication Password Authenticate IDDNS mode Unregister on Reboot Disable Dtmf SIP T1 TimeoutEnable Call Features Disable Call Waiting Dial Plan Prefix Special FeatureUse # as Dial key Dial Plan Dial Plan Rules VAD Slic Setting Srtp ModeDisable Line Echo Canceller LEC Outgoing Call Without Authenticate PasswordSIP registration failure Retry wait time Dian Plan Negotiation Proxy Require Invite Ring-No-Answer Timeout Preferred Vocoder FSK Caller ID minimum Caller ID SchemeRX Level dB FSK Caller ID Seizure Enable Pstn Disconnect Enable CurrentPstn Ring Thru Delay First Digit Timeout sec Configuration through a Central Server Saving the Configuration ChangesRebooting from Remote Software Upgrade Firmware Upgrade through TFTP/HTTP/HTTPS Managing Firmware and Configuration File Download Configuration File DownloadFirmware and Configuration File Prefix and Postfix Restore Factory Default Setting