Grandstream Networks HT503 user manual MTZ+6MDT+5

Models: HT503

1 38
Download 38 pages 38.84 Kb
Page 20
Image 20

TABLE 8: BASIC SETTINGS

 

End User Password

 

This contains the password for end user to access the Web Configuration Menu. User

 

 

 

 

can put new password here. This field is case sensitive with maximum of 25 characters

 

 

 

 

 

 

 

 

Web Port

 

This is the device’s internal HTTP server port. Default is 80.

 

 

 

 

 

 

 

 

Telnet Server

 

Default is set to YES. Telnet access is allowed to the device in this case. Used only for

 

 

 

 

special purposes such as debugging and troubleshooting. List of available commands

 

 

 

 

will be shown by pressing >help command from telnet console.

 

 

 

 

 

 

 

 

IP Address

 

If DHCP mode is enabled, then all the field values for the Static IP mode are not

 

 

 

 

used (even though they are still saved in the Flash memory.) The HT503 will acquire

 

 

 

 

its IP address from DHCP in the network.

 

 

 

 

 

PPPoE settings are usually for DSL/ADSL modem users. The HT503 will attempt to

 

 

 

 

establish a PPPoE session if PPPoE account is set.

 

 

 

 

 

If Static IP mode is selected, the IP address, Subnet Mask, Default Router IP

 

 

 

 

address, DNS Server 1 (mandatory), DNS Server 2 (optional) fields need to be

 

 

 

 

configured.

 

 

 

 

 

 

 

 

 

 

 

 

 

DHCP hostname

 

This option specifies the name of the client. This field is optional but may be required

 

 

 

 

by some Internet Service Providers. Default is blank.

 

 

 

 

 

 

 

 

DHCP domain

 

This option specifies the domain name that client should use when resolving

 

 

 

 

hostnames via the Domain Name System. Default is blank.

 

 

 

 

 

 

 

 

DHCP vendor class ID

 

This option is used by clients and servers to exchange vendor-specific information.

 

 

 

 

Default is blank.

 

 

 

 

 

 

 

 

 

PPPoE account ID

 

PPPoE username. Necessary if your ISP requires you to use a

PPPoE (Point to Point

 

 

 

 

Protocol over Ethernet) connection

 

 

 

 

 

 

 

 

 

PPPoE password

 

PPPoE account password

 

 

 

 

 

 

 

 

PPPoE Service name

 

This field is optional. If your ISP uses a service name for the PPPoE connection, enter

 

 

 

 

the service name here. Default is blank.

 

 

 

 

 

 

 

 

 

Preferred DNS

 

The address of your preferred DNS server.

 

 

 

 

 

 

 

 

Time Zone

 

This parameter controls how the displayed date/time will be adjusted according to the

 

 

 

 

specified time zone.

 

 

 

 

 

 

 

 

Self Defined Time Zone

 

The syntax is: std offset dst [offset], start [/time], end [/time]

 

 

 

 

Default is set to: MTZ+6MDT+5,M3.2.0,M11.1.0

 

 

 

 

 

MTZ+6MDT+5,

 

 

 

 

 

This indicates a time zone with 6 hours offset with 1 hour ahead which is U.S central

 

 

 

 

time. If it is positive (+) if the local time zone is west of the Prime Meridian and

 

 

 

 

negative (-) if it is east.

 

 

 

 

 

Prime Meridian (A.K.A: International or Greenwich Meridian)

 

 

 

 

M3.2.0,M11.1.0

 

 

 

 

 

The 1st number indicates Month: 1,2,3.., 12 (for Jan, Feb, .., Dec)

 

 

 

 

The 2nd number indicates the nth iteration of the weekday: (1st Sunday, 3rd Tuesday…)

 

 

 

 

The 3rd number indicates weekday: 0,1,2,..,6( for Sun, Mon, Tues,..,Sat)

 

 

 

 

Therefore, this example is the DST which starts from the second Sunday of March to

 

 

 

 

the 1st Sunday of November.

 

 

 

 

 

 

 

 

 

Language

 

Languages supported with the voice prompt.

 

 

 

 

 

 

 

 

Device Mode

 

This parameter controls whether the device is working in NAT router mode or Bridge

 

 

 

 

mode. Save the setting and reboot prior to configuring the HT503.

 

 

 

 

 

 

 

NAT Maximum Ports

 

The number of ports that can be managed while in NAT router mode.

 

 

 

 

Range: 0 – 4096, default is 1024. Typically one port per connection.

 

 

 

 

 

 

 

NAT TCP Timeout

 

NAT TCP idle timeout in seconds. Connection will be closed after preconfigured,

 

 

 

 

timeout if not refreshed.

 

 

 

 

 

Range: 0 - 3600

 

 

 

 

 

 

 

 

 

Grandstream Networks, Inc.

 

HT503 User Manual

Page 20 of 38

 

 

 

 

Firmware 1.0.4.2

Last Updated: 06/2011

 

Page 20
Image 20
Grandstream Networks HT503 user manual MTZ+6MDT+5