Grandstream Networks user manual Equipment Packaging, Connecting the HT503

CONNECT YOUR HT503

Equipment Packaging

The HT503 ATA package contains:

•One HT503 Main Case

•One Universal Power Adaptor

•One Ethernet Cable

•One HT503 Vertical Stand

Connecting the HT503

The HT503 is designed for easy configuration and easy installation. Configure the HT503 following the directions in the Configuration section of this manual.

1.Connect a standard touch-tone analog telephone to the PHONE port.

2.Insert a standard RJ11 telephone cable into the LINE port and connect the other end of the telephone cable to a wall jack.

3.Insert the Ethernet cable into the WAN port of HT503 and connect the other end of the Ethernet cable to an uplink port (a router or a modem, etc.)

4.Connect a PC to the LAN port of HT503 if it is being used as a router.

5.Insert the power adapter into the HT503 and connect it to a wall outlet.

The HT503 Analog Telephone Adaptor is an all-in-one VoIP integrated device designed to be a total solution for networks providing VoIP services. The HT503 VoIP features and functions are available using a regular analog telephone.

FIGURE 1: CONNECTING THE HT503
HT503	HT503
	Back View
Front View

Display LEDs	RJ-45 Ports	Reset	Power
	10/100 Mbps
(Green)			Supply
			(12V)

RJ11 RJ11

FXS Port FXO Port

The HT503 has one FXS port and one FXO port. The PHONE port next to the power supply is an FXS port. The LINE port on the back right of the HT503 is an FXO port. Both the FXS port and the FXO port can have a separate SIP account. This is a key feature of HT503 as it supports simultaneous calls on both the FXS port and FXO port. Telephone calls can be originated from or terminated on the PSTN network remotely via the FXO port.

Grandstream Networks, Inc.	HT503 User Manual	Page 5 of 38
	Firmware 1.0.4.2	Last Updated: 06/2011