Only an administrator can access the “ADVANCED SETTING”, “FXS PORT” and “FXO PORT” configuration pages. Please reference the GUI pages using the following link: http://www.grandstream.com/products/ht_series/ht503/documents/ht503_gui.zip.
DEFINITIONS
This section will describe the options in the Web configuration user interface. As mentioned, a user can log in as an administrator or
Functions available for the
•STATUS: Displays the network status, account status, software version and
•BASIC SETTINGS: Basic preferences such as date and time settings,
Additional functions available to administrators are:
•ADVANCED SETTINGS: To set advanced network settings, codec settings and XML configuration settings.
•FXS PORT: To configure the FXS port.
•FXO PORT: To configure the FXO port.
| TABLE 7: STATUS PAGE |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
| MAC Address |
|
| The device ID, in HEX format. This is very important ID for ISP troubleshooting. Both |
| ||||||||||||
|
|
|
| LAN and WAN MAC addresses are located here. The LAN MAC address is used for |
| ||||||||||||
|
|
|
| provisioning and is written on the label in the original box as well as on the label located |
| ||||||||||||
|
|
|
| on the back panel of the device. |
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| WAN IP Address |
|
| This field shows IP address of the HT503. |
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
| Product Model |
|
| This field contains the product model info, such as HT503. |
|
|
|
|
| ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
| Software Version |
|
| Program: This is the main software release. This number is always used for firmware |
| ||||||||||||
|
|
|
| upgrade. Current release is 1.0.0.15 |
|
|
|
|
|
|
|
| |||||
|
|
|
| Bootloader: current version is 1.0.0.7 |
|
|
|
|
|
|
|
| |||||
|
|
|
| Core: | current version 1.0.0.23 |
|
|
|
|
|
|
|
| ||||
|
|
|
| Base: current version is 1.0.0.66 |
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
| System Uptime |
|
| This shows system up time since last reboot. |
|
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
| PPPoE Link Up |
|
| This shows whether the PPPoE is up if connected to DSL modem |
|
|
| ||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
| NAT |
|
| This shows what kind of NAT the HT503 is connected to. It is based on STUN |
| ||||||||||||
|
|
|
| protocol. If the detected NAT is symmetric NAT, STUN will not work and Outbound |
| ||||||||||||
|
|
|
| Proxy needed to make HT503 functioning correctly. |
|
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
| Port Status |
|
| Displays information regarding the individual FXS ports. |
|
|
|
|
| ||||||||
|
|
|
|
| Port |
| Hook | Registration |
| DND |
| Forward | Busy |
| Delayed |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Forward |
| Forward |
|
|
|
|
|
|
| FXS |
| On Hook | Registered |
| Yes |
| 613 |
|
|
|
|
|
|
|
|
|
| FXO |
| Idle | Registered |
| No |
|
| 614 |
|
|
|
|
|
|
|
| • | Both FXS port and FXO port are registered with this SIP Server. |
|
|
| |||||||||
|
|
|
| • | FXS Port user has set Do Not Disturb. |
|
|
|
|
|
|
|
| ||||
|
|
|
| • | FXS Port user has set his calls to be forwarded unconditionally to ext 613. |
|
|
| |||||||||
|
|
|
| FXO Port user has set his calls to forward to 614 when his phone is busy. |
|
|
| ||||||||||
Grandstream Networks, Inc. | HT503 User Manual | Page 19 of 38 |
| Firmware 1.0.4.2 | Last Updated: 06/2011 |
