GETTING QUALITY SERVICE
•If oil is level is below ADD mark, fill to proper level.
•If oil level is above the FULL mark, drain to proper level.
5.Insert dipstick. Tighten cap.
Tires
Rear | 18 x 6.5 - 8 |
Front | 11 x 4 - 5 |
Inflation Rear (Maximum) | |
Inflation Front (Maximum) |
Connect Battery
CAUTION: Avoid injury! Prevent Battery Explosions:
•Keep sparks, lighted matches, and open flame away from the top of battery. Battery gas can explode.
•Never check battery charge by placing a metal object across the posts. Use a
•Do not charge a frozen battery; it may explode. Warm bat- tery to 16 degrees C (60 degrees F).
Battery
Voltage | |
CCA | |
Reserve Capacity | 67 minutes |
BCI Group Size | U1 |
Capacities
Fuel Tank | 18.9 L (5 gal) |
Hydraulic Oil (With Filter) | 3.1 L (3.3 qt.) |
Engine Oil (With Filter) 1.9 L (2.0 qt.)
1.Connect positive (red) cable to battery positive (+) terminal. Install red terminal cover (A).
2.Connect negative (black) cable to battery negative
Check Machine Safety Systems
Perform safety system check to make sure the electronic safety interlock circuit is functioning properly.
Specifications
Engine
Note: See engine manufacturer’s owner’s manual provided with your machine for engine specifications.
Drivetrain
Type | Dual Hydrostatic | |
Pumps | ||
Wheel Motors | ||
Number of Speeds | Infinitely Variable | |
Electrical System
Charging System | ..................................................15 Amp |
Ignition | Flywheel |
Starter | Solenoid Shift |
Fuel System
Fuel Type | Gasoline, Regular Unleaded |
Fuel Tank Location | On Right Side of Operator |
Fuel Capacity | 22.7 L (6.0 gal) |
Steering and Brakes
Steering | Dual Control Levers |
Steering | Hydraulic |
Park Brake | Tire Contact |
Travel Speeds at Full Engine RPM
Forward | |
Reverse |
Dimensions
Overall Height | 1.47 m (47 in.) |
Overall Length | 1.48 m (58.5 in.) |
Overall Width (with chute up) | .89 m (35 in.) |
Overall Width (with chute down) | 1.19 m (47 in.) |
Recommended Lubricants
Engine Oil | See Applicable Engine Manual |
Hydraulic Oil |
Grease: (This may change for
(Specifications and design subject to change without notice.)
Getting Quality Service
Service Literature
If you would like to order a copy of the Parts Catalog or Operator Manual for this machine, contact your Great Dane Dealer. Parts catalogs and operator manuals are also avail- able online at Great Dane.com.
Parts
We recommend Great Dane quality parts available at your Great Dane dealer.
Part numbers may change, use part numbers listed below when you order. If a number changes, your dealer will have the latest number.
When you order parts, your Great Dane dealer needs your machine serial number and engine serial number. These are the numbers that you recorded in the Product Identifica- tion section of this manual.
GETTING QUALITY SERVICE - 42
