Great Dane GSRKA1934S manual Service Mower, Service Steering & Brakes, Adjusting Park Brake

SERVICE MOWER

Picture Note: Engine removed for picture clarity.

1.Park machine safely. (See Parking Safely in the SAFETY section.)

2.Loosen nuts (A).

3.Adjust neutral switch (B).

•If neutral switch sensitivity needs to be increased, adjust switch (B) down in slots.

•If neutral switch sensitivity needs to be decreased, adjust switch (B) up in slots.

4.Tighten nuts (A).

Service Steering & Brakes

Adjusting Park Brake

Testing Park Brake:

1. Inflate tires to correct pressures.

2.Stop machine on a maximum 17° slope.

3.Lock park brake.

•A properly adjusted park brake must prevent the drive wheels from turning.

•If the drive wheels turn, a brake adjustment will be necessary.

Adjusting Park Brake:

1.Park machine safely. (Refer to Parking Safely in the SAFETY section.)

2.Unlock park brake.

A C

B

Picture Note: Battery Box and Battery removed for clarity.

3.Remove rue clip (B).

4.Turn brake linkage yoke in one-turn increments on the brake link rod (C) clockwise to increase braking force; counterclockwise to decrease braking force.

5.Install rue clip (B).

6.Test park brake. Adjust again, if required.

Service Mower

Removing and Installing Mower Deck Shield

CAUTION: Avoid injury! Help prevent serious personal injury. Do not operate the mower with- out the mower deck shield installed.

Removing Mower Deck Shield:

1. Park machine safely. (See Parking Safely in the SAFETY section.)

A

2. Remove two knobs (A).

SERVICE MOWER - 28