Grindmaster 5512 Problem, Probable Cause, Solution, Excessive dispensing, valve leakage, Page

PROBLEM	PROBABLE CAUSE	SOLUTION
Excessive dispensing	Worn or defective O-Rings	Replace and lubricate at
valve leakage		each cleaning
Scraping sound during	Frozen product scraping off of	Normal sound during freeze
freeze down	cylinder walls	down, goes away when
		product is frozen to proper
		consistency
Clicking sound	Low voltage	Connect freezer to dedicated
		circuit of proper rating
	Extension cord or improperly sized	Connect freezer directly to
	electrical wire	power source using properly
		sized wiring.
Thumping sound from	Worn drive belt	Replace belt
inside freezer

If you still need help, call our service department at (800) 695-4500 (USA & Canada only) or (502) 425-4776 (Monday through Friday, 8 am - 8 pm EST) or an authorized service center in your area. Please have the model and serial numbers ready so that accurate information can be given.

Prior authorization must be obtained from Grindmaster Corporation’s Technical Services Department for all warranty claims.

Crathco® 5512 Manual Page 21