Grizzly G0505 instruction manual Mounting to Bench Handle Assembly, To mount the planer

Mounting to Bench Handle Assembly

The planer can be directly mounted to a bench or table top, or to a Shop Fox® Deluxe Tool Table for increased stability during planing.

To mount the planer:

1.Determine the correct length of hex bolts needed to mount the planer to your work- bench. This will be the height of the planer mounting holes, plus the thickness of your workbench, plus an extra 1⁄2" for washers and the hex nut.

2.From the hardware store, get (4) 1⁄8" hex bolts that meet the length requirements for your setup. Also get (8) 1⁄2" flat washers, (4) 1⁄2" lock washers, and (4) 1⁄2" hex nuts.

3.Mount the planer to your workbench with your hardware in the order shown in Figure 3.

Planer Mounting

Hole

Workbench

Figure 3. Mounting planer to bench.

To attach the handle assembly:

1.Align the flat portion inside the handle bore with the flat portion on the shaft.

2.Insert the handle assembly on the shaft that protrudes out of the top of the planer (see Figure 4).

3.Thread the M5-.8 x 20mm cap screw through the handle and into the shaft to secure the handle in place. DO NOT over-tighten.

Figure 4. Attaching handle.

	-11-
G0505 121⁄2" Lean & Mean Portable Planer