Star Trac E-TR manual Final Assembly

7. Final Assembly

10-24 Machine

Screws

Re-install the shroud over the motor compartment, install the (4) 10- 24 Machine Screws that were saved from earlier. Insert the (4) plas- tic caps in the lower neck.

Plastic Caps

M4 x 0.7

Screws

Install the bottom of the display using the (6) M4 x0.7 x 19mm long Phillips head screws. Next install the back of the display with (8) of the same screws.

M4 x 0.7

Screws

Securely tighten all hardware installed during assembly.

NOTE: Perform a visual inspection, and test the features and functions of the unit, prior to use.

You have now completed the assembly of your STAR TRAC E SERIES TREADMILL.

10-24 Machine Screws

M4 x 0.7

Screws

M4 x 0.7

Screws

STAR TRAC E SERIES TREADMILL OWNER’S MANUAL 15