![](/images/new-backgrounds/1289985/28998527x1.webp)
2. Installing the Neck
Remove the (4)
Washer
Lock Washer
Socket Head Screw
3. Removing the Motor Shroud
Remove the
4. Installing the Neck
Position the bottom of the neck over the 4 threaded hole in the lower frame, an then use the 1/4” Hex Allen Key to install the (4) Socket Head Cap Screws and washers you removed earlier.
Washer
Lock Washer
Socket Head Screw
Screws | Screws |
5.Installing the Display
a) Use the #2 Phillips Screwdriver to remove the (4) screws that hold the back of the shroud to the display unit. Retain screws for later use. Place the back shroud aside to be installed later. Be careful not to damage the plastic.
Step 5a
12 | STAR TRAC E SERIES TREADMILL OWNER’S MANUAL |