Dust Collection

Auxiliary Rollers

 

 

 

 

 

 

An efficient and clean dust collection system is essential to the proper function of the rip saw. Ensuring a healthy work environment is also dependent upon cleaning and maintaining the dust collection system. Clamp a 4" hose from the dust collection system to the dust port (Figure 16).

Figure 16. Dust collection hook-up.

Components and Hardware Needed: Qty

Auxiliary Roller Brackets (Left)

2

Auxiliary Roller Brackets (Right)

2

Auxiliary Rollers

4

Hardware Bag

 

—Cap Screws M6-1.0 x 16

8

—Setscrews M6-1.0 x 30

4

—Lock Washers 6mm

8

—Flat Washers 6mm

4

—Hex Nuts 6-1.0

4

Tools Needed:

 

Allen Wrench 3mm

1

Allen Wrench 4mm

1

Allen Wrench 5mm

1

Wrench 10mm

1

Wrench 13mm

1

The Model G0524 is supplied with 4 auxiliary rollers (Figure 17) that can be attached when rip cutting workpieces shorter than 8". Note—These auxiliary rollers can be left on the machine when cutting longer boards; however, the maximum thickness cutting capacity of the saw is reduced to 214".

Auxiliary Roller

Figure 17. Auxiliary roller (1 of 4).

G0524 Rip Saw

-19-

Page 21
Image 21
Grizzly G0524 owner manual Dust Collection Auxiliary Rollers, Components and Hardware Needed Qty, Tools Needed