Grizzly G0572 instruction manual Beginning Mounting, Table-TopMount

Beginning Mounting

You can install the air filter unit one of the following ways:

•Table-Top Mount: Use the rubber feet and/or the flush mount flange brackets (see Figures 6 & 7) for a table-top application).

•Hanging Mount: Use the eye bolts (see Figures 6 & 7) for a high ceiling application. Refer to Page 16.

•Flush Mount: Use the flush mount flange brackets (see Figures 6 & 7) for a wall or low ceiling application. Refer to Page 17.

Hanging Mount

Eye Bolt

Flush Mount

Flange Bracket

Table-Top

Mount

Rubber Foot

Figure 6. Air filter unit mounting options.

Hanging Mount	Table-Top Mount
Eye Bolt	Rubber Foot
	Flush Mount
	Flange Bracket

Figure 7. Air filter unit mounting hardware.

!Keep the air filter unit unplugged during all

installation procedures. Ignoring this warning may result in serious personal injury to you or others!

Table-Top Mount
Components and Hardware Needed	Qty
Rubber feet	4

Get lifting assistance before installation. At 64 pounds (shipping weight), the Model G0572 air filter is a heavy load.

You can use the air filter unit as a portable air filtration system by installing the rubber feet and placing the unit on a workbench or a table.

To set up the air filter for table-top operation:

1.With the help of an assistant, carefully invert the air filter unit.

2.Expose the sticky backing on the foot, and affix the rubber foot to the bottom of the air

filter unit, as shown in Figure 8.

G0572 Hanging Air Filter with Remote -15-