Grizzly G0572 Circuit Requirements, 110V Operation, Amperage Draw, Circuit Breaker Requirements

SECTION 2: CIRCUIT REQUIREMENTS

110V Operation

Serious personal injury could occur if you connect the machine to the power source before you have completed the set up pro- cess. DO NOT connect the machine to the power source until instructed to do so.

Amperage Draw

The 1⁄5 HP motor on the Model G0572 will draw the following amps on the highest setting:

Motor Load 3 Amps

Circuit Breaker Requirements

Make sure the supply circuit, circuit breaker, or fuse can carry the additional 3 amp load since other machines may be using the same circuit. If the total amperage load of all machines and the air filter unit exceeds the amperage rating of the circuit breaker or fuse, use a different circuit that can carry the load.

DO NOT modify an existing low-amperage circuit by only replacing the circuit breaker with a breaker rated for a higher amperage. The breaker and the complete circuit must be replaced by a qualified electrician.

Circuit Breaker 10 Amp

Plug Type

The Model G0572 is supplied with a 5-15 plug, similar to Figure 1.

Figure 1. Typical type 5-15 plug and receptacle.

G0572 Hanging Air Filter with Remote -7-