Grizzly G0572 instruction manual Lip Mounting holes

2.Drill the bolt pattern to accept at least 1⁄4" lag bolts for studs; or use 1⁄4" nuts, bolts, and washers for mounting to supports.

3.Position the flange bracket under the air filter unit lip at the mounting hole location (Figure 12). For permanent table-top mounting, use the lower-lip holes (Figure 13).

Lip

Mounting holes

Figure 12. Flange bracket mounting holes and

lip.

4.Install the flat washers and the hex bolts to secure the flange brackets to the unit (Figure 14).

Flange Bracket

Mounted Under Lip

Flange Bracket

Figure 14. Flange correctly installed under lip.

5.Repeat Steps 3 & 4 for the other three flange brackets.

6.With the help of an assistant, position the air filter on the wall or ceiling, and screw or bolt the unit in place.

Figure 13. Lower-lip mounting holes.

-18- G0572 Hanging Air Filter with Remote