SECTION 4: OPERATIONS
Operation Safety
Damage to your eyes and lungs could result from using this machine without proper pro- tective gear. Always wear safety glasses and a respirator when operating this machine.
Loose hair and cloth-
ing could get caught in
machinery and cause seri-
ous personal injury. Keep
loose clothing and long
hair away from moving machinery.
NOTICE
If you have never used this type of machine or equipment before, WE STRONGLY REC- OMMEND that you read books, trade maga- zines, or get formal training before begin- ning any projects. Regardless of the con- tent in this section, Grizzly Industrial will not be held liable for accidents caused by lack of training.
Changing Speeds
To change speeds, the belt in the headstock must be rearranged. A chart on the pulley cover shows the belt positions needed to make the lathe run at the desired speed.
To change speeds:
1.Loosen the lock handle, remove the belt cover, and open the access plate (Figure 8).
G0624 10" Benchtop Lathe
| Belt | |
| Cover | |
Lock |
| |
Handle |
| |
Access |
| |
Plate |
| |
Belt Tension | Belt Tension | |
Lock Knob | ||
Lever | ||
|
Figure 8. Belt access.
2.Loosen the belt tension lock knob, and move the belt tension lever up to reduce tension on the belt.
3.Locate the desired speed on the speed chart on the belt cover, and move the belt to the desired grooves on the motor and spindle pulleys.
For Example: As indicated in the speed chart, belt position B creates 1270 RPM (Figure 9).
���������
� � � | � | ��� |
� | ����� | |
� | � | ���� |
� | � | ���� |
� | � | ���� |
| ||
| � | ���� |
������������
