Grizzly G0624 owner manual Sanding/Finishing

Sanding/Finishing

After turning, the workpiece can be sanded, as shown in Figure 27, and finished (in the same manner) before removing it from the lathe.

���������

���������

Wrapping the sandpa- per completely around the workpiece will pull your hands into the mov- ing workpiece and may cause injury. Never wrap sandpaper completely around the workpiece!

Figure 27. Typical sanding operation.

-20-

Whenever sanding or finishing, move the tool rest holder out of the way to increase personal safety and gain adequate working room.

G0624 10" Benchtop Lathe