Grizzly G0648 owner manual Inventory, Crate 1 Figure Qty, Box 2 Figure Qty

Inventory

The following is a description of the main compo- nents shipped with your machine. Lay the compo- nents out to inventory them.

Note: If you can't find an item on this list, check the mounting location on the machine or examine the packaging materials carefully. Occasionally we pre-install certain components for shipping purposes.

Crate 1: (Figure 3)	Qty
A. Welding Fume Extractor Unit	...................... 1

B.Button Head Cap Screws 3/8"-16 x 1"

.	(Ducting Arm)	6
C.	Flat Washer 3/8" (Ducting Arm)	6
D.	Roller Filter Paper (Pre-Installed Roll)	1
E.	Door Levers	2
F.	Downdraft Table Adapter Box	1
G.	Bolt Bag	1
.	—Hex Bolts 3/8"-16 x 3/4" (Adapter Box)	6
.	—Flat Washers 3/8" (Adapter Box)	6
Box 2: (Figure 4)		Qty
H.	Ducting Arm and Shroud Assembly	1

SUFFOCATION HAZARD!

Immediately discard all plastic bags and packing materials to eliminate choking/suffocation hazards for children and animals.

-12-

B C

A

F G D

E

Figure 3. Welding fume extractor unit.

H

Figure 4. Ducting arm assembly.

If any nonproprietary parts are missing (e.g. a nut or a washer), we will gladly replace them; or for the sake of expediency, replacements can be obtained at your local hardware store.

G0648 Welding Fume Extractor