SECTION 8: WIRING
These pages are current at the time of printing. However, in the spirit of improvement, we may make changes to the electrical systems of future machines. Study this diagram carefully. If you notice differences between your machine and these wiring diagrams, call Technical Support at (570)
Electrical Safety Instructions
1.SHOCK HAZARD. Disconnect the power from the machine before servicing electri- cal components. Touching electrified parts will result in personal injury including but not limited to severe burns, electrocution, or death.
2.CIRCUIT REQUIREMENTS. You MUST fol- low the CIRCUIT REQUIREMENTS section on Page 10. If you are unsure about the wiring codes in your area or you plan to connect your machine to a shared cir- cuit, consult a qualified electrician.
3.GROUNDED CIRCUIT. Electrocution or fire could result if the machine is not grounded and installed in compliance with electrical codes. Compliance MUST be verified by a qualified electrician.
4.MOTOR WIRING. The motor wiring shown in these diagrams are current at the time of printing, but it may not match your machine. Always use the wiring diagram inside the motor junction box.
5.EXPERIENCING DIFFICULTIES. If at any time you are experiencing difficulties under- standing the information included in this section, contact our Technical Support at (570)
NOTICE
The photos and diagrams included in this section are best viewed in color. You can view these pages in color at www.grizzly.com.
WARNING!
SHOCK HAZARD!
Disconnect power before working on wiring. 
NOTICE
This machine uses sensitive electronics that rely on stable current on all power supply legs. We do not recommend connecting this machine to a phase converter. Ignoring this notice may void warranty.
G0648 Welding Fume Extractor |
