SECTION 3: SETUP
This machine presents serious injury hazards to untrained users. Read through this entire manu- al to become familiar with the controls and opera- tions before starting the machine!
Wear safety glasses dur- ing the entire setup pro- cess!
SUFFOCATION HAZARD!
Immediately discard all plas- tic bags and packing materi- als to eliminate choking/suf- focation hazards for children and animals.
Needed for Setup
The following are needed to complete the setup process, but are not included with your machine.
Description | Qty | |
• Safety Glasses and Respirator | ................... 1 | |
• | Mounting Fasteners | As Needed |
• | Tape Measure | 1 |
• | Drill w/Bits | As needed |
Unpacking
Your machine was carefully packaged for safe transportation. Remove the packaging materials from around your machine and inspect it. If you discover the machine is damaged, please imme- diately call Customer Service at (570)
Save the containers and all packing materials for possible inspection by the carrier or its agent. Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the condi- tion of your shipment, inventory the contents.
Inventory
The following is a description of the main compo- nents shipped with your machine. Lay the compo- nents out to inventory them.
Note: If you can't find an item on this list, check the mounting location on the machine or examine the packaging materials carefully. Occasionally we
Inventory | Qty | |
• Body and Motor Assembly | 1 | |
• | Wall Mounting Bracket | 1 |
• | Dust Collection Bag | 1 |
• Quick Release Bag Clamp | 1 | |
• Adhesive Foam Strip 3 x 34 x 280mm | 1 | |
Hardware |
| |
• Flange Bolts | 4 | |
• Open End Wrench 10 x 12mm | 1 | |
If any nonproprietary parts are missing (e.g. a nut or a washer), we will gladly replace them; or for the sake of expediency, replacements can be obtained at your local hardware store.
Model G0710 Dust Collector (Mfg. since 6/10+)
