![](/images/new-backgrounds/1213707/21370729x1.webp)
Unpacking
The Model G1022 Series is shipped from the manufacturer in a carefully packed carton. If you discover the machine is damaged after you have signed for delivery, immediately call Customer Service for advice.
When you are completely satisfied with the con- dition of your shipment, you should inventory its parts.
If moving this machine up or down stairs, the machine must be dis- mantled and moved in smaller pieces. Make sure floor and stair structures are capable of supporting the com- bined weight of the machine parts and the people moving them.
The Model G1022 Series represents a heavy load. Seek assistance before beginning assembly.
Some metal parts may have sharp edges on them after they are formed. Please examine the edges of all metal parts before handling them. Failure to do so could result in injury.
Piece Inventory
After all the parts have been removed from the car- ton, you should have:
1.Stand Components
2.Extension Wings (2)
3.
4.Motor with Pulley
5.Motor Bracket
6.Motor Mount Plate
7.Table Saw Unit
8.Handwheels (2)
9.Arbor Wrench
10.Dado Insert
11.Standard Insert
12.Miter Gauge
14.Blade Guard
15.Blade Guard Bracket
16.Hardware Bags (5)
17.
18.
19.Fence Unit (Separate Box W/ZF, ZFX and Pro)
20.Fence Rails (Separate Box)
19 |
|
|
|
| 11 |
|
|
2 | 12 | 4 | 18 |
| |||
9 | 10 |
|
|
|
|
| |
15 | 3 |
| 5 |
|
| ||
|
|
| |
7 |
| 6 |
|
|
|
| 17 |
1 | 14 |
| |
| 8 |
| 16 |
20
Figure 6B. (G1022 Layout) Rip fence, rails and extension wings will vary depending on model.
G1022 Series Contractor Saws |