TableHANDLES
1.Place the table into the hole in the table brack- et and secure with the handle. Figure 6.
Figure 6. Installing the table.
2.Turn the crank handle to be sure the worm pinion engages the teeth on the rack and moves the bracket up and down. Figure 7. CAUTION: Never use the drill press with either table lock loose.
Figure 7.
Screw the three handle bars into the tapped holes in the handle body. Figure 8.
Figure 8. Handles installed.
|
|
|
|
|
|
|
|
|
|
|
|
G1199/G1200 Drill Press | |||
