SECTION 3: ADJUSTMENTS
Belt Tracking |
| Auxiliary Table |
|
|
|
|
|
|
1.Carefully move the belt left to right by hand and adjust the tracking knob as necessary to achieve proper tracking. Figure 18.
2.Before beginning this step, read the Safety Rules on page 17 and Test Run on page 18. Connect to power and turn the machine on and off quickly. If the belt appears to track OK turn the machine on and fine tune the tracking. Tighten the tracking lock knob.
Adjustment Knob
Locking Knob
Figure 18. Belt tracking adjustment knobs.
Loosen the thumb screws, position the auxiliary table, re-tighten the thumb screws. Figure 19. Note that the ends of the roller are tapered. This helps keep the belt tracked. When using the end roller for curved sanding, we recommend you use the center portion of the roller to assure proper belt tracking. This also prevents the edge of the workpiece from becoming tapered.
Figure 19. Auxiliary table positioning.
|
|
|
|
|
|
|
|
|
| G1531 Edge Sander | |
|
|
