Edge & End Sanding
Figure 23 depicts a typical edge sanding process.
Figure 23. Edge sanding process.
Figure 24 depicts a typical method for sanding the end of a workpiece.
Figure 24. Sanding the end of a piece.
Contour Sanding
When contour sanding, adjust the auxiliary table up or down so the workpiece is roughly centered on the roller. Move the workpiece over the roller to achieve your desired profile. Figure 25.
Figure 25. Contour sanding on auxiliary table.
|
|
|
|
|
|
|
|
|
| G1531 Edge Sander | |
|
|
