Grizzly G4173 1 8 HP owner manual Box Inventory Figures 3 Qty

Inventory

The following is a description of the main compo- nents shipped with your machine. Lay the compo- nents out to inventory them.

Note: If you can't find an item on this list, check the mounting location on the machine or examine the packaging materials carefully. Occasionally we pre-install certain components for shipping purposes.

Box Inventory (Figures 3 & 4)		Qty
A.	Base	1
B.	Arm Bracket	1
C.	Power Feeder Unit	1
D.	Arm	1
E.	Base Mounting Template	1
F.	Elbow Clamp Assembly	1
G.	Ball Joint Assembly	1
H.	Hardware Bag (Figure 4)	1
	—Cap Screw M10-1.5 x 25mm
	(Elbow Clamp)	1
	—Hex Bolt M10-1.5 x 50mm
	.........................................(Elbow Clamp)	3
	—Lock Lever (Arm Bracket Clamp)	1
	—Hex Nut M8-1.25mm
	(Arm Bracket Clamp)	1
	—Flat Washer 8mm (Arm Bracket Clamp) .1
	—T-Handle and Pivot Bar
	(Ball Joint Assembly)	1
	—Hex Bolt M10-1.5 x 35mm (Base)	4
	—Lock Washer 10mm (Base)	4
	—Hex Nut M10-1.5mm (Base)	4

SUFFOCATION HAZARD!

Immediately discard all plas- tic bags and packing materi- als to eliminate choking/suf- focation hazards for children and animals.

Model G4173 1⁄8 HP Power Feeder

						C
			B
	A
				D
					G
		F
E
							H

Figure 3. Box inventory.

H

Figure 4. Hardware inventory.

If any nonproprietary parts are missing (e.g. a nut or a washer), we will gladly replace them; or for the sake of expediency, replacements can be obtained at your local hardware store.

-11-